{"title":"VMP Satellite and Antenna Mounts","description":null,"products":[{"product_id":"tr-60-5-tripod","title":"5' Tripod","description":"\u003cp\u003eThe VMP TR-60 is a 60 inch (5 foot) heavy duty roof tripod for antenna masts and satellite dish pipe. It is built primarily from tube and angular steel riveted together, and it holds masts and pipe up to 1.75 inch OD. Front facing mounting feet and an included pitch pad kit make it straightforward to seal and fasten to the roof surface.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVMP model TR-60, a 60 inch (5 foot) heavy duty tripod\u003c\/li\u003e\n\u003cli\u003eDesigned for antenna masts and satellite dish pipe\u003c\/li\u003e\n\u003cli\u003eAccepts masts and pipe up to 1.75 inch OD\u003c\/li\u003e\n\u003cli\u003eConstructed primarily of tube and angular steel, riveted together\u003c\/li\u003e\n\u003cli\u003eTwo mounting rings stabilize the antenna mast\u003c\/li\u003e\n\u003cli\u003eBottom mounting ring supports the base of the mast so it does not touch the roofing surface\u003c\/li\u003e\n\u003cli\u003eInstaller friendly front facing mounting feet\u003c\/li\u003e\n\u003cli\u003eIncludes a pitch pad kit for proper sealing during roof mounting\u003c\/li\u003e\n\u003cli\u003eIncludes a universal mast clamp\u003c\/li\u003e\n\u003cli\u003eDark gray weather resistant powder coat finish\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VMP","offers":[{"title":"Default Title","offer_id":51208710947094,"sku":"TR-60","price":96.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/8816\/8470\/files\/5-tripod-16.jpg?v=1776291051"},{"product_id":"tr-36-3-foot-tripod","title":"3 Foot Tripod","description":"\u003cp\u003eThe Video Mount Products TR-36 is a 36 inch (3 foot) heavy duty roof tripod for antenna masts and satellite dish pipe. It is built primarily of tube and angular steel riveted together, and it accepts masts and pipe up to 1.75 inch outside diameter. Two mounting rings stabilize the mast, and the lower ring supports the bottom of the mast so it does not rest on the roofing surface.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVMP model TR-36, a 36 inch (3 foot) heavy duty tripod\u003c\/li\u003e\n\u003cli\u003eHolds antenna masts and satellite dish pipe up to 1.75 inch outside diameter\u003c\/li\u003e\n\u003cli\u003eConstructed primarily of tube and angular steel, riveted together for strength\u003c\/li\u003e\n\u003cli\u003eTwo mounting rings stabilize the mast, with the bottom ring supporting the mast base off the roof surface\u003c\/li\u003e\n\u003cli\u003eIncludes a universal mast clamp for a secure hold\u003c\/li\u003e\n\u003cli\u003eIncludes a pitch pad kit for proper sealing during roof surface mounting\u003c\/li\u003e\n\u003cli\u003eInstaller friendly, front facing mounting feet\u003c\/li\u003e\n\u003cli\u003eDark gray, weather resistant powder coat finish for outdoor use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VMP","offers":[{"title":"Default Title","offer_id":51208711143702,"sku":"TR-36","price":61.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/8816\/8470\/files\/3-foot-tripod-16.jpg?v=1776291051"},{"product_id":"br4xd-heavy-duty-4-wall-mount-for-dbs","title":"Heavy Duty 4\" Wall Mount for DBS","description":"\u003cp\u003eThe VMP BR-4XD is a pair of heavy duty wall brackets that hold an antenna or DBS satellite mounting pipe against a wall. Each pair supports the pipe at two points for a stable, level install, and the fixed 3 inch clearance keeps the pipe off the wall surface. It fits a range of common antenna and satellite pipe sizes, so you can match it to your existing mast.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSold as a pair of heavy duty wall mounting brackets\u003c\/li\u003e\n\u003cli\u003eHolds an antenna or DBS satellite mounting pipe\u003c\/li\u003e\n\u003cli\u003eAccommodates 1 inch to 2.25 inch pipe diameter\u003c\/li\u003e\n\u003cli\u003e3 inch clearance from the wall\u003c\/li\u003e\n\u003cli\u003eSupports the pipe at two points for a secure, level mount\u003c\/li\u003e\n\u003cli\u003eVMP model BR-4XD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VMP","offers":[{"title":"Default Title","offer_id":51208711242006,"sku":"BR4XD","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/8816\/8470\/files\/heavy-duty-4-wall-mount-for-dbs-br-4xd-13.jpg?v=1776291110"},{"product_id":"sm-1-dbs-siding-mount","title":"DBS Siding Mount","description":"\u003cp\u003eThe VMP SM-1 DBS Siding Mount attaches a small satellite dish or off-air antenna to the exterior siding of a home or building. It is built for outdoor use and gives installers a simple way to secure a DBS or antenna mast to a vertical wall surface. Mounting hardware for fastening the bracket to siding is included.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVMP model SM-1, part of the Video Mount Products satellite and antenna mount line\u003c\/li\u003e\n\u003cli\u003eWall-side (siding) mount for a small DBS or DSS satellite dish or off-air antenna\u003c\/li\u003e\n\u003cli\u003eOutdoor-rated for exterior installation\u003c\/li\u003e\n\u003cli\u003eAttaches to the vertical siding of a home or building\u003c\/li\u003e\n\u003cli\u003eIncludes mounting hardware to fasten the bracket to the wall\u003c\/li\u003e\n\u003cli\u003eShips as a single box, roughly 7.5 in by 5.5 in by 1 in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VMP","offers":[{"title":"Default Title","offer_id":51208711405846,"sku":"SM-1","price":89.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/8816\/8470\/files\/dbs-siding-mount-16.jpg?v=1776291052"},{"product_id":"gem-4060-adjustable-gable-end-mount","title":"Adjustable Gable End Mount","description":"\u003cp\u003eThe GEM-4060 is a gable-end mount for off-air antennas, designed to secure an antenna mast to the gable end of a roof. The mounting bracket adjusts from 40 in. to 60 in. from left to right, so it fits a range of gable widths. An adjustable bottom portion lets you fasten the mount further down the mast for added support and stability.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGable-end antenna mount for off-air antennas\u003c\/li\u003e\n\u003cli\u003eMounting bracket adjusts from 40 in. to 60 in. (left to right) to fit varying gable widths\u003c\/li\u003e\n\u003cli\u003eHolds up to a 1.5 in. diameter antenna mast\u003c\/li\u003e\n\u003cli\u003eAdjustable bottom portion secures further down the mast for greater stability\u003c\/li\u003e\n\u003cli\u003eInstalls on the gable end of a roof\u003c\/li\u003e\n\u003cli\u003eShipping weight approximately 8 lbs.\u003c\/li\u003e\n\u003cli\u003eShips in a single box, about 35.5 in. x 4 in. x 2 in.\u003c\/li\u003e\n\u003cli\u003eVMP model GEM-4060\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VMP","offers":[{"title":"Default Title","offer_id":51208711700758,"sku":"GEM-4060","price":46.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/8816\/8470\/files\/adjustable-gable-end-mount-15.jpg?v=1776291051"},{"product_id":"prm-2-non-penetrating-pitched-roof-mount","title":"Non Penetrating Pitched Roof Mount","description":"\u003cp\u003eThe VMP PRM-2 mounts an 18\" or 24\" DBS\/DSS satellite antenna on a pitched roof without drilling into the roofing surface. It holds position with ballast, so weight keeps it in place instead of fasteners. The frame pivots so you can add ballast to either side of the roof peak, and an adjustable dish plate lets you fine tune the aim.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVMP model PRM-2 non-penetrating pitched roof mount\u003c\/li\u003e\n\u003cli\u003eAccommodates an 18\" or 24\" DBS\/DSS antenna\u003c\/li\u003e\n\u003cli\u003eNon-penetrating design, no holes in the roofing surface\u003c\/li\u003e\n\u003cli\u003eHolds up to ten 8\" x 8\" x 16\" standard concrete blocks for ballast\u003c\/li\u003e\n\u003cli\u003eIncludes a pitch pad kit to attach the mount to the roofing surface if desired\u003c\/li\u003e\n\u003cli\u003ePivots to let you add ballast to either side of the roof peak\u003c\/li\u003e\n\u003cli\u003eAdjustable dish mounting plate for aiming\u003c\/li\u003e\n\u003cli\u003eHeavy duty steel construction\u003c\/li\u003e\n\u003cli\u003eDark gray weather resistant powder coat finish\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VMP","offers":[{"title":"Default Title","offer_id":51208711799062,"sku":"PRM-2","price":175.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/8816\/8470\/files\/non-penetrating-pitched-roof-mount-16.jpg?v=1776291110"},{"product_id":"frm-125-non-penetrating-roof-mount-1-25-od","title":"Non Penetrating Roof Mount 1.25\" OD","description":"\u003cp\u003eThe VMP FRM-125 is a non-penetrating roof mount for antennas and satellite dishes that anchors with standard concrete blocks, so you never have to drill into the roof. It gives you a 60 inch mast with a 1.25 inch outside diameter on a 35 inch by 35 inch steel base. The dark gray weather resistant powder coat finish is built to stand up outdoors, making it a good fit for DBS, off-air antenna, satellite internet, and point to point CCTV installations.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVMP model FRM-125 non-penetrating roof mount\u003c\/li\u003e\n\u003cli\u003e60 inch mast with a 1.25 inch outside diameter (O.D.)\u003c\/li\u003e\n\u003cli\u003e35 inch by 35 inch base footprint\u003c\/li\u003e\n\u003cli\u003eHolds up to 8 standard size concrete blocks as ballast, so no roof penetration is required\u003c\/li\u003e\n\u003cli\u003ePrimarily constructed of angular and tubular steel\u003c\/li\u003e\n\u003cli\u003eDark gray weather resistant powder coat finish for outdoor use\u003c\/li\u003e\n\u003cli\u003eFor use with DBS, off-air antennas, and satellite internet systems\u003c\/li\u003e\n\u003cli\u003eAlso suited to point to point CCTV signal transmission\u003c\/li\u003e\n\u003cli\u003eShips in one box, approximately 28.5 lbs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VMP","offers":[{"title":"Default Title","offer_id":51208711831830,"sku":"FRM-125","price":189.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/8816\/8470\/files\/non-penetrating-roof-mount-1-25-od-16.jpg?v=1776291110"},{"product_id":"frm-166-non-penetrating-roof-mount-1-66-od","title":"Non Penetrating Roof Mount 1.66\" OD","description":"\u003cp\u003eThe Video Mount Products FRM-166 mounts an antenna or satellite dish on a flat roof without any penetration. It anchors with up to 8 standard concrete blocks used as ballast, so you do not drill or bolt into the roof surface. The 30 inch mast has a 1.66 inch outside diameter and the whole frame is finished in a weather resistant powder coat for outdoor use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVMP model FRM-166 non-penetrating roof mount\u003c\/li\u003e\n\u003cli\u003e30 inch mast with a 1.66 inch outside diameter\u003c\/li\u003e\n\u003cli\u003eNo roof penetration required, ballasted with up to 8 standard size concrete blocks (blocks not included)\u003c\/li\u003e\n\u003cli\u003eBuilt primarily of angular and tubular steel\u003c\/li\u003e\n\u003cli\u003e35 inch by 35 inch base frame footprint\u003c\/li\u003e\n\u003cli\u003eDark gray, weather resistant powder coat finish for outdoor installations\u003c\/li\u003e\n\u003cli\u003eSuited to DBS, off-air antenna, and satellite internet systems\u003c\/li\u003e\n\u003cli\u003eAlso works for point to point CCTV signal transmission\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VMP","offers":[{"title":"Default Title","offer_id":51208711864598,"sku":"FRM-166","price":180.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/8816\/8470\/files\/non-penetrating-roof-mount-1-66-od-16.jpg?v=1776291110"},{"product_id":"frm-200-non-penetrating-roof-mount-2-od","title":"Non Penetrating Roof Mount 2\" OD","description":"\u003cp\u003eThe VMP FRM-200 is a non-penetrating roof mount that supports antennas and satellite dishes without drilling into the roof. It uses up to 8 standard concrete blocks as ballast, so the mount holds steady while leaving the roof membrane intact. The unit ships with a 30 inch mast at 2.00 inch outer diameter and a 35 inch by 35 inch steel base.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNon-penetrating design anchors with up to 8 standard concrete blocks, no roof penetration required\u003c\/li\u003e\n\u003cli\u003e30 inch mast with 2.00 inch outer diameter (2.00\" O.D.)\u003c\/li\u003e\n\u003cli\u003e35 inch by 35 inch base footprint\u003c\/li\u003e\n\u003cli\u003ePrimarily constructed of angular and tubular steel\u003c\/li\u003e\n\u003cli\u003eDark gray weather-resistant powder coat finish for outdoor use\u003c\/li\u003e\n\u003cli\u003eSuited for DBS and off-air antennas, satellite internet systems, and point-to-point CCTV signal transmission\u003c\/li\u003e\n\u003cli\u003eVMP (Video Mount Products) model FRM-200\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VMP","offers":[{"title":"Default Title","offer_id":51208711897366,"sku":"FRM-200","price":180.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/8816\/8470\/files\/non-penetrating-roof-mount-2-od-16.jpg?v=1776291110"},{"product_id":"frm-mat-rubber-mat","title":"Rubber Mat","description":"\u003cp\u003eThe VMP FRM-MAT is a recycled rubber mat that sits between a non-penetrating roof mount and the roof surface. It works with the FRM and PRM series non-penetrating roof mounts, adding a protective layer that helps guard the roofing membrane where the mount rests. Because the mount does not penetrate the roof, this mat helps keep the contact area cushioned.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eModel FRM-MAT rubber mat by Video Mount Products (VMP)\u003c\/li\u003e\n\u003cli\u003eActs as a protective membrane between the mount and the roofing surface\u003c\/li\u003e\n\u003cli\u003eDesigned for use with VMP FRM and PRM series non-penetrating roof mounts\u003c\/li\u003e\n\u003cli\u003eMade from recycled rubber\u003c\/li\u003e\n\u003cli\u003eDimensions: 36 3\/4 in. x 42 in. x 1\/8 in.\u003c\/li\u003e\n\u003cli\u003eSuited to non-penetrating rooftop satellite and antenna mount installations\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VMP","offers":[{"title":"Default Title","offer_id":51208711995670,"sku":"FRM-MAT","price":26.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/8816\/8470\/files\/rubber-mat-15.jpg?v=1776291110"},{"product_id":"gu-3-swivel-bracket","title":"Swivel Bracket","description":"\u003cp\u003eThe VMP GU-3 is a heavy duty swivel wall bracket that holds an antenna or DBS satellite pipe. It clamps around the mast and holds it 3 inches off the wall, so the pipe can be swiveled and aimed for a clear signal. A two piece clamp cradles the mast, and the welded bracket bolts to a wall top plate for a secure hold. Mounting hardware is included.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVMP model GU-3 swivel wall bracket for antenna and DBS satellite masts\u003c\/li\u003e\n\u003cli\u003eAccommodates antenna or DBS pipe from 1.25 inches to 3 inches in diameter\u003c\/li\u003e\n\u003cli\u003eHolds the mast 3 inches off the wall for clearance and aiming\u003c\/li\u003e\n\u003cli\u003eTwo piece clamp with a welded cradle bracket that grips the pipe securely\u003c\/li\u003e\n\u003cli\u003eWelded bracket attaches to a wall top plate using the included lock washer and hex nut\u003c\/li\u003e\n\u003cli\u003eIncludes clamping hardware: two 3\/8 inch to 16UNC carriage bolts (2-3\/4 inch), two 3\/8 inch to 16UNC hex nuts, one 1\/2 inch to 12UNC hex nut, and one lock washer\u003c\/li\u003e\n\u003cli\u003eProfessional installation recommended; verify the mounting surface supports the combined weight of the bracket, hardware, and mast\u003c\/li\u003e\n\u003cli\u003eShips at 3 lbs, 13.5 inches by 2.75 inches by 2 inches\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VMP","offers":[{"title":"Default Title","offer_id":51208712061206,"sku":"GU-3","price":21.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/8816\/8470\/files\/swivel-bracket-16.jpg?v=1776291110"},{"product_id":"p-6-vent-pipe-mount","title":"Vent Pipe Mount","description":"\u003cp\u003eThe VMP P-6 is a pair of mounting attachments that let you secure an antenna or DBS satellite mast to an existing roof vent pipe, so you can add or reposition off-air and satellite hardware without drilling new roof penetrations. It clamps to a range of common vent pipe sizes and holds a standard antenna or DBS mast pipe. Because it ships as a matched pair, one kit provides the top and bottom attachment points for a stable install.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVMP model P-6, sold as a pair (two mounting attachments per kit)\u003c\/li\u003e\n\u003cli\u003eAttaches to existing vent pipes measuring 2.75 in. to 5 in. outside diameter\u003c\/li\u003e\n\u003cli\u003eAccommodates a 1 in. to 2 in. antenna or DBS mast pipe\u003c\/li\u003e\n\u003cli\u003eWorks with both off-air antenna masts and DBS satellite masts\u003c\/li\u003e\n\u003cli\u003eUses an existing roof vent pipe, so no new roof penetration is required\u003c\/li\u003e\n\u003cli\u003eCompact hardware kit, ships at roughly 3 lbs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VMP","offers":[{"title":"Default Title","offer_id":51208712225046,"sku":"P-6","price":26.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/8816\/8470\/files\/vent-pipe-mount-16.jpg?v=1776291155"},{"product_id":"wb-6-vmp-6-wall-mount","title":"VMP 6\" Wall Mount","description":"\u003cp\u003eThe VMP WB-6 is a pair of U-bolt antenna mast holders that fasten to a wall and hold your antenna or satellite mast steady. Each bracket provides a 6 inch clearance from the wall, giving the mast room to clear eaves, trim, and other obstructions. It is a straightforward way to mount an antenna and keep it stable.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eModel WB-6, sold in pairs for a two-point mount\u003c\/li\u003e\n\u003cli\u003eU-bolt mast holder design that clamps around the mast\u003c\/li\u003e\n\u003cli\u003eProvides a 6 inch clearance between the wall and the mast\u003c\/li\u003e\n\u003cli\u003eAccommodates 1.25 inch to 1.66 inch outer diameter antenna or DBS pipe\u003c\/li\u003e\n\u003cli\u003eWall-mount configuration for antenna and satellite mast support\u003c\/li\u003e\n\u003cli\u003eShips as one box, about 2 lbs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VMP","offers":[{"title":"Default Title","offer_id":51208712257814,"sku":"WB-6","price":26.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/8816\/8470\/files\/vmp-6-wall-mount-15.jpg?v=1776291155"},{"product_id":"y-mount-y-type-chimney-mount","title":"\"Y\" Type Chimney Mount","description":"\u003cp\u003eThe VMP Y-MOUNT is a chimney mount that gives you a simple, secure way to attach an antenna or DBS pipe to a chimney. It wraps the chimney with heavy anodized steel straps, so no bricks need to be drilled. The mount is sold in pairs and works with common round mast sizes.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVMP model Y-MOUNT, a \"Y\" type chimney mount for antennas and DBS pipe\u003c\/li\u003e\n\u003cli\u003eAccommodates 1.25 inch to 1.66 inch antenna or DBS pipe\u003c\/li\u003e\n\u003cli\u003eIncludes 0.75 inch wide by 18 inch anodized steel straps that wrap the chimney\u003c\/li\u003e\n\u003cli\u003eStrap mounting means no drilling into the chimney masonry\u003c\/li\u003e\n\u003cli\u003eAnodized steel construction resists corrosion for outdoor use\u003c\/li\u003e\n\u003cli\u003eSold in pairs for a stable two point hold on the mast\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VMP","offers":[{"title":"Default Title","offer_id":51208712323350,"sku":"Y-MOUNT","price":37.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/8816\/8470\/files\/y-type-chimney-mount-17.jpg?v=1776291155"},{"product_id":"z-mount-z-type-chimney-mount","title":"\"Z\" Type Chimney Mount","description":"\u003cp\u003eThe Z-MOUNT is a strap-on chimney mount for securing an outdoor antenna or DBS satellite pipe to a square or rectangular masonry chimney. It clamps the mast with two supports and steel straps that wrap the chimney, so no holes are drilled into the brick. The kit ships as a pair, and VMP recommends spacing the two supports as far apart as possible for the steadiest hold on the mast.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVMP model Z-MOUNT, a Z style chimney mount for antenna or satellite pipe\u003c\/li\u003e\n\u003cli\u003eAccommodates a 1.25 in. to 1.66 in. outer diameter antenna or DBS mast pipe\u003c\/li\u003e\n\u003cli\u003eStraps around square or rectangular chimneys with no drilling into the brick\u003c\/li\u003e\n\u003cli\u003eIncludes two steel straps that tension around the chimney with a connect component\u003c\/li\u003e\n\u003cli\u003eEach support holds the mast in a V notch and clamps it with a U bolt and hex nuts\u003c\/li\u003e\n\u003cli\u003eSold as a pair of supports with all straps, U bolts, nuts, and cable ties included\u003c\/li\u003e\n\u003cli\u003eCable ties are provided to dress and secure loose antenna wiring\u003c\/li\u003e\n\u003cli\u003eSuitable for outdoor use on a masonry chimney\u003c\/li\u003e\n\u003cli\u003eProfessional installation is recommended, and the mounting surface must support the combined weight of the mount, hardware, and antenna\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VMP","offers":[{"title":"Default Title","offer_id":51208712356118,"sku":"Z-MOUNT","price":26.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0713\/8816\/8470\/files\/z-type-chimney-mount-16.jpg?v=1776291155"}],"url":"https:\/\/videomountstore.com\/collections\/vmp-satellite-and-antenna-mounts.oembed","provider":"Video Mount Store","version":"1.0","type":"link"}