• VMP Multi-Just Mid-SizeTilting Wall Mount for 27 to 42 Inch
1 1

VMP Multi-Just Mid-SizeTilting Wall Mount for 27 to 42 Inch

SKU FP-MFTB

$137.95
$246.95 $137.95
Save $109.00 (44%)

Tax & shipping calculated at checkout

Ships same or next business day

Talk to a mount expert

800-585-8795

30-day returns

Easy & no hassle

Built to last

Heavy-gauge metal

The VMP FP-MFTB is a mid-size tilting wall mount that holds most 27 to 42 inch flat panel TVs weighing up to 100 lbs. It sits the screen just 2.3 inches from the wall for a clean, low-profile look, while the tilt range of -5 to +15 degrees helps cut glare and set a comfortable viewing angle. Post-install adjustments let you fine-tune height and leveling for accurate placement, and a built-in kickstand holds the screen out from the wall to make cable routing easier.

  • Holds most 27 to 42 inch flat panel TVs
  • Load capacity up to 100 lbs
  • Tilt range of -5 to +15 degrees
  • Maximum flat panel hole pattern of 415mm wide by 345mm tall
  • Sits just 2.3 inches from the wall to the back of the panel
  • Vertical height adjustment of 1 inch after installation
  • Leveling (list) adjustment of plus or minus 3 degrees after installation
  • Installer-friendly kickstand aids flat panel wiring
  • Attaches to at least 2 studs up to 16 inches apart or other suitable support surface
  • Formed steel construction with arc welds and security screws
  • Black powder coat finish

Product details

Screen size 27-42"
Max weight 100 lb · 45 kg
Tilt 5° up · 15° down
Mount distance 2.3" from wall

VESA mounting pattern

VESA is the spacing between the four bolt holes on the back of your TV. Screen sizes are a guideline - any TV whose bolt pattern fits this mount and whose weight is under the rating will work, even if the screen is larger. Enter what you measure below and we'll match it to the nearest standard size and check the fit.

VESA hole pattern shown to scale on the back of a display VESA mounting holes 100 to 415 mm wide and 100 to 345 mm tall, shown to scale on an approximately 42 inch 16:9 display.
100-345 mm 3.9-13.6"
100-415 mm 3.9-16.3"

shown to scale on a ~42" screen (16:9)

100-415 mm wide · 100-345 mm tall(3.9-16.3" wide · 3.9-13.6" tall)

Supported standards100×100VESA 100 by 100 mm, about 4 by 4 inches100×200VESA 100 by 200 mm, about 4 by 8 inches200×100VESA 200 by 100 mm, about 8 by 4 inches200×200VESA 200 by 200 mm, about 8 by 8 inches200×300VESA 200 by 300 mm, about 8 by 12 inches300×200VESA 300 by 200 mm, about 12 by 8 inches300×300VESA 300 by 300 mm, about 12 by 12 inches400×200VESA 400 by 200 mm, about 16 by 8 inches400×300VESA 400 by 300 mm, about 16 by 12 inches

Common standards within this hole range - not an exhaustive list.

Will my TV fit?

round to the nearest inch - close is fine, we'll match it to the standard size

enter your TV's spacing to check

How do I find my TV's pattern?

Find the four threaded holes on the back of your TV and measure between them - left-to-right and top-to-bottom, center to center. Round to the nearest inch. Or check your TV's manual, or search "[your model] VESA pattern".

Can't find it or not sure? Call us at 800-585-8795 or email sales@videomountstore.com - we can usually look up your TV's pattern faster than you can.

View full details