• Universal Dual LCD Monitor Wall Mount
1 1

Universal Dual LCD Monitor Wall Mount

SKU LCD-WM2

$399.95
$399.95

Tax & shipping calculated at checkout

Ships same or next business day

Talk to a mount expert

800-585-8795

30-day returns

Easy & no hassle

Built to last

Heavy-gauge metal

The VMP LCD-WM2 is a dual-arm wall mount that lets you place two small flat-panel screens side by side on a single stud or other suitable support surface. It ships with two multi-configurable LCD-1 articulating arms on a shared bar, so each display can be positioned independently. The adaptor is built primarily of tubular steel with arc welds and carries a 50 lb rated load capacity. A silver powder coat finish helps it blend into most rooms.

  • VMP model LCD-WM2 dual wall mount, includes two multi-configurable LCD-1 articulating arms on a shared bar
  • Mounts two small flat-panel screens side by side on a single stud
  • Rated load capacity of 50 lbs for the adaptor
  • Center arm extends 11 inches from the wall
  • Each arm extends the screen from 11 inches to 27 inches off the wall for reach and cable access
  • Fits VESA patterns from 75 x 75 mm to 100 x 100 mm
  • Recommended for screens sized 10 to 24 inches
  • Tilt range of 5 degrees up to 30 degrees down for glare control
  • Built primarily of tubular steel with arc welds
  • Silver powder coat finish

Product details

Screen size 10-24"
Max weight 50 lb · 23 kg
Tilt 5° up · 30° down
Mount distance 11-27" from wall

VESA mounting pattern

VESA is the spacing between the four bolt holes on the back of your TV. Screen sizes are a guideline - any TV whose bolt pattern fits this mount and whose weight is under the rating will work, even if the screen is larger. Enter what you measure below and we'll match it to the nearest standard size and check the fit.

VESA hole pattern shown to scale on the back of a display VESA mounting holes 75 to 100 mm wide and 75 to 100 mm tall, shown to scale on an approximately 24 inch 16:9 display.
75-100 mm 3-3.9"
75-100 mm 3-3.9"

shown to scale on a ~24" screen (16:9)

75-100 mm wide · 75-100 mm tall(3-3.9" wide · 3-3.9" tall)

Supported standards75×75VESA 75 by 75 mm, about 3 by 3 inches100×100VESA 100 by 100 mm, about 4 by 4 inches

Common standards within this hole range - not an exhaustive list.

Will my TV fit?

round to the nearest inch - close is fine, we'll match it to the standard size

enter your TV's spacing to check

How do I find my TV's pattern?

Find the four threaded holes on the back of your TV and measure between them - left-to-right and top-to-bottom, center to center. Round to the nearest inch. Or check your TV's manual, or search "[your model] VESA pattern".

Can't find it or not sure? Call us at 800-585-8795 or email sales@videomountstore.com - we can usually look up your TV's pattern faster than you can.

View full details